Passa al contenuto principale Salta alla ricerca Passa alla navigazione principale
Menu

Weightless Walls

Designing walls with limewash and distemper

Weightless Walls

Designing walls with limewash and distemper

They appear to float weightlessly and, despite their self-assured matt finish, radiate a sense of vitality: interior walls painted with lime-based paints such as limewash or with distemper. This is enhanced by their iridescent, subtle cloud-like quality, which can be carefully controlled.

Distemper: A historical paint formula

Distemper products are characterised by the use of casein as a binder. As this is a common milk protein, casein paints were used very early on in painting and interior design.

Whilst limewash creates more pronounced textures, distemper produces surfaces with an almost textile-like appearance. The very low gloss level of distemper means: no reflections, no glare, no harsh edges in oblique light. Deep shades thus appear velvety and rich, whilst light shades appear soft. Brush marks and brush textures may remain subtly visible under certain lighting conditions.

Apply using a fine synthetic brush. The paint is first applied vertically and then spread evenly horizontally. It must be applied wet-on-wet, meaning the wall must be painted in a single stroke, otherwise visible brush marks will appear.

Distemper is not wipe-resistant. Kitchens, bathrooms and high-traffic areas are therefore not suitable.

Crinale di montagna rocciosa con cime coperte di neve

Distemper: A historical paint formula

Distemper products are characterised by the use of casein as a binder. As this is a common milk protein, casein paints were used very early on in painting and interior design.

Whilst limewash creates more pronounced textures, distemper produces surfaces with an almost textile-like appearance. The very low gloss level of distemper means: no reflections, no glare, no harsh edges in oblique light. Deep shades thus appear velvety and rich, whilst light shades appear soft. Brush marks and brush textures may remain subtly visible under certain lighting conditions.

Apply using a fine synthetic brush. The paint is first applied vertically and then spread evenly horizontally. It must be applied wet-on-wet, meaning the wall must be painted in a single stroke, otherwise visible brush marks will appear.

Distemper is not wipe-resistant. Kitchens, bathrooms and high-traffic areas are therefore not suitable.